Hi All,
I have a issue with XWA joystick config. I use HOTAS X56, the program doesnt detect axis and buttons on stick.
Game use only Throttle controller for pitch, yaw and roll (if set as primary). This isnt much comfortable
When I set stick for pitch, roll and yaw, ship rotate to down and left.
In other sims (DCS world, Elite Dangerous...etc.) hotas works great.
Thank you for help
Have a nice day
Edit: I have same issue in XvT...
[SOLVED]XWA joystick config doesnt detected Axis and Buttons
[SOLVED]XWA joystick config doesnt detected Axis and Buttons
- unmarcz
- Posts: 27
- Joined: Wed Jun 03, 2020 3:54 pm
You do not have the required permissions to view the files attached to this post.
- unmarcz
- Posts: 27
- Joined: Wed Jun 03, 2020 3:54 pm
Issue was probably coused windows update...
My Procedure cca 20 min:
Uninstall logitech software
Remove both devices in device manager (stick and throttle) - delete drivers
Unplug devices
Restart
Run CCleaner and delete old registry
Run RegEdit and manually delete everything that contains - X56, Saitek, Logitech
Restart
Run CCLeaner again and again delete old/bad/with error registry
Restart
Install Logitech software and connect both devices - first stick
Restart
Stick shows correct number of axis and buttons in XWA joystick config, AND WORKS IN XWAU and older SW sims!
Second solution is probably windows reinstall...
My Procedure cca 20 min:
Uninstall logitech software
Remove both devices in device manager (stick and throttle) - delete drivers
Unplug devices
Restart
Run CCleaner and delete old registry
Run RegEdit and manually delete everything that contains - X56, Saitek, Logitech
Restart
Run CCLeaner again and again delete old/bad/with error registry
Restart
Install Logitech software and connect both devices - first stick
Restart
Stick shows correct number of axis and buttons in XWA joystick config, AND WORKS IN XWAU and older SW sims!
Second solution is probably windows reinstall...
-
- Posts: 1
- Joined: Sun Jul 04, 2021 2:23 pm
I ran into the same problem but found a bit easier solution (=less steps) that worked for me. Found it from Logitech FAQ:
https://support.logi.com/hc/en-150/arti ... es-RegEdit
Many thanks for the original post though, it put me on the right track!
https://support.logi.com/hc/en-150/arti ... es-RegEdit
Many thanks for the original post though, it put me on the right track!