XWA keeps crashing at same point in Prologue Mission 6
XWA keeps crashing at same point in Prologue Mission 6
-
- Posts: 16
- Joined: Mon Aug 14, 2017 6:01 am
Every time I reach 64% Rebels evacuated in this mission, the game crashes. Before I installed WXA 1.4, I didn't have any problem playing this mission. What gives? Is this an XWAUpgrade bug?
-
- Posts: 520
- Joined: Mon Jan 31, 2005 12:01 am
I still have issues running a resolution above 1080p. XWA hacker says it has a fix, but I don't think it works. Are you running a resolution higher than 1200 height? That might be the issue.
-
- Posts: 16
- Joined: Mon Aug 14, 2017 6:01 am
I'm playing at 1600x1200 resolution. I don't understand why such a high resolution would cause the game to crash near the end of a mission and at the same point of the mission multiple times, though. What changes from the beginning to the end of a particular mission (and that mission only) would force a crash? And would a corrupt mission file have anything to do with this?
Keep in mind, I have no idea what I'm talking about here. I'm no programmer or any sort of computer expert, I'm just spitballing here.
Keep in mind, I have no idea what I'm talking about here. I'm no programmer or any sort of computer expert, I'm just spitballing here.
- JeremyaFr
- Posts: 3989
- Joined: Mon Jan 18, 2010 5:52 pm
- Contact:
Hello,
This crash is caused by the fix for high resolutions.
To disable it, open xwahacker-qt and uncheck "Fix crashes for high résolutions (height > 1200)", then click Save.
This crash is caused by the fix for high resolutions.
To disable it, open xwahacker-qt and uncheck "Fix crashes for high résolutions (height > 1200)", then click Save.
-
- Posts: 16
- Joined: Mon Aug 14, 2017 6:01 am
I'll try this and let you know how it goes.JeremyaFr wrote:Hello,
This crash is caused by the fix for high resolutions.
To disable it, open xwahacker-qt and uncheck "Fix crashes for high résolutions (height > 1200)", then click Save.
EDIT: Jeremy, I think you need to run this by me step by step (see previous post about me not being a programmer). Is xwahacker-qt different from xwahacker 3.0? When I unzipped xwahacker3.0, I got a folder filled with a bunch of files that I can't make sense of, and two of them that were application files. I ran the application file named "xwahacker" and it gave me a DOS screen that I have no idea how to read and nothing that looked anything like a check box.
- Darksaber
- Posts: 10931
- Joined: Mon Jan 10, 2000 12:01 am
- Contact:
1. Go to https://sourceforge.net/projects/xwahacker/files/
2. download xwahacker-gui-0.30-win.zip
3. unzip
4. from your XWA Dir copy and paste the xwingalliance.exe to the xwahacker-gui-0.30-win folder (from a fresh install of either XWAUCPv1.4 or DSUCPv2.4)
5. run xwahacker-qt.exe and select xwingalliance.exe
6. uncheck "Fix crashes for high resolutions (height > 1200)"
7. click Save
8. Copy and paste the xwingalliance.exe back to your XWA Dir overwriting the older version.
9. test
10. report if fixed
2. download xwahacker-gui-0.30-win.zip
3. unzip
4. from your XWA Dir copy and paste the xwingalliance.exe to the xwahacker-gui-0.30-win folder (from a fresh install of either XWAUCPv1.4 or DSUCPv2.4)
5. run xwahacker-qt.exe and select xwingalliance.exe
6. uncheck "Fix crashes for high resolutions (height > 1200)"
7. click Save
8. Copy and paste the xwingalliance.exe back to your XWA Dir overwriting the older version.
9. test
10. report if fixed
“You can please some of the people all of the time, you can please all of the people some of the time, but you can’t please all of the people all of the time”.”
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
-
- Posts: 16
- Joined: Mon Aug 14, 2017 6:01 am
Just did the above and tested it. It crashed at 50% ships evacuated instead of 64%. Ugh, wtf is wrong with this thing?
-
- Posts: 16
- Joined: Mon Aug 14, 2017 6:01 am
I said "screw it" and played through Prologue Mission 6 without the Upgrade and then installed the Upgrade immediately afterwards. If this is a bug of some kind, I'll just let the people here figure it out while I continue to play the game I've waited 20 years to play right.
Seriously, having a joystick with 12 programmable buttons (Logitech Extreme 3D Pro) makes ALL the difference in this game. That sort of joystick isn't something I could have justified buying for $200 back in 1999.
And having the improved graphics from the XWAUpgrade for most of the ships makes it all the sweeter. Thanks for all your hard work, guys!
Seriously, having a joystick with 12 programmable buttons (Logitech Extreme 3D Pro) makes ALL the difference in this game. That sort of joystick isn't something I could have justified buying for $200 back in 1999.
And having the improved graphics from the XWAUpgrade for most of the ships makes it all the sweeter. Thanks for all your hard work, guys!
- ffaaway
- Posts: 92
- Joined: Mon May 05, 2003 11:01 pm
Dsucp 2.6 I was crashing a lot on this mission.
I assumed it was from trying some hook ini editing but in the end I flipped off "win XP SP2 compatibility mode" and "run as administrator" and made it past this mission with my hooks enabled
Thought I'd post that in case it helps someone.
I am on win 10.
I assumed it was from trying some hook ini editing but in the end I flipped off "win XP SP2 compatibility mode" and "run as administrator" and made it past this mission with my hooks enabled
Thought I'd post that in case it helps someone.
I am on win 10.
X-Wing pilot since 1993 and still kickin'
- capitanguinea
- Posts: 226
- Joined: Sun Aug 30, 2015 3:59 pm
Ok, can you post the crash report windows give to you?
there could be two main causes: first is a problem in the mission - some ship measures could be changed in the upgrade, creating some numerical nonsense, and from that the crash (or mission bugs). Second is some issue in the directx or hardware. In the first case you should take care to note when exactly that crash happens (if some ship does trigger the event in some way), so we could try to work around. In the second you should expect some byte master around here take a look on that and procure the fix, what they do really finely.
there could be two main causes: first is a problem in the mission - some ship measures could be changed in the upgrade, creating some numerical nonsense, and from that the crash (or mission bugs). Second is some issue in the directx or hardware. In the first case you should take care to note when exactly that crash happens (if some ship does trigger the event in some way), so we could try to work around. In the second you should expect some byte master around here take a look on that and procure the fix, what they do really finely.
that could be a secondary effect in the logics of the mission. IE. if mission setup require a ship to be at some distance from an object to clear to hyperspace, but with new ships that object would be within the space occupied by ship itself, there will be no hyperjump (in most cases) or some crashes (if the mission refer the numbers of that distances, wich return an unvalid number value, crashing the AI or the graphic engine of the game). If you are fond of Allied, try to discover the logical trigger for that part of the mission, and give a look to the waypoint, to be sure that there will be enough space between ships and their jumpoints and so on.