The XWAU is proud to present the XWAU Crafts Pack
Re: The XWAU is proud to present the XWAU Crafts Pack
- Darksaber
- Posts: 10931
- Joined: Mon Jan 10, 2000 12:01 am
- Contact:
The PES Cockpit, it will be fixed, Marco fixed this at the time, I corrected the single installer at the time, but I didn't copy the new cockpit opt to the XWAUCP or the DSUCP but these will be fixed
R-41 this is weird it must have been this way since 2007, but I've updated it now with Torps
TIE Defender:
Can you confirm your hardpoint co-ordinates in MXvTED to make sure I have them correct
MESH 2:
130.1352
-178.2629
-25.0485
MESH 3:
86.7603
-178.2629
-100.1762
MESH 4:
-86.7603
-178.2629
-100.1762
MESH 3:
-130.1352
-178.2629
-25.0485
TIE Interceptor:
Can you confirm the hardpoint co-ordinates to make sure I have the correct firing order
MESH 2:
126.2495
-281.4802
48.0008
MESH 3:
126.2495
-281.4802
-47.9992
MESH 4:
-126.2495
-281.4802
48.0008
MESH 3:
-126.2495
-281.4802
-47.9992
If you set yours out the same way as I have mine then I will know that it is X, Y, Z
Thanks Rookie, a second pair of eyes is most welcoming, and yes the installers will be updated
R-41 this is weird it must have been this way since 2007, but I've updated it now with Torps
TIE Defender:
Can you confirm your hardpoint co-ordinates in MXvTED to make sure I have them correct
MESH 2:
130.1352
-178.2629
-25.0485
MESH 3:
86.7603
-178.2629
-100.1762
MESH 4:
-86.7603
-178.2629
-100.1762
MESH 3:
-130.1352
-178.2629
-25.0485
TIE Interceptor:
Can you confirm the hardpoint co-ordinates to make sure I have the correct firing order
MESH 2:
126.2495
-281.4802
48.0008
MESH 3:
126.2495
-281.4802
-47.9992
MESH 4:
-126.2495
-281.4802
48.0008
MESH 3:
-126.2495
-281.4802
-47.9992
If you set yours out the same way as I have mine then I will know that it is X, Y, Z
Thanks Rookie, a second pair of eyes is most welcoming, and yes the installers will be updated
“You can please some of the people all of the time, you can please all of the people some of the time, but you can’t please all of the people all of the time”.”
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- Rookie_One1
- Posts: 1656
- Joined: Thu Feb 26, 2004 12:01 am
Iconfirm, I set up the meshed exactly as you did to fix this on my side when i "bugtested"
Rookie One, is that you?? - Ru Merleen, Rebel Spy at Imdaar Alpha
Current Holder of the Frying Pan of Death
Current Holder of the Frying Pan of Death
- Darksaber
- Posts: 10931
- Joined: Mon Jan 10, 2000 12:01 am
- Contact:
Brilliant, Thanks, if you find any more faults with the TIES or any other craft please let me know I've turned on my PM so please use that
“You can please some of the people all of the time, you can please all of the people some of the time, but you can’t please all of the people all of the time”.”
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- Rookie_One1
- Posts: 1656
- Joined: Thu Feb 26, 2004 12:01 am
Will do
for the before mentionned bug about the toscan, did not see that one (and I tested it a lot)
Also personally I preferred the green lasers for the toscan, but well.....still look cool
Also is it normal that the lambda shuttle now have some of their front facing guns considered as turrets ?
for the before mentionned bug about the toscan, did not see that one (and I tested it a lot)
Also personally I preferred the green lasers for the toscan, but well.....still look cool
Also is it normal that the lambda shuttle now have some of their front facing guns considered as turrets ?
Rookie One, is that you?? - Ru Merleen, Rebel Spy at Imdaar Alpha
Current Holder of the Frying Pan of Death
Current Holder of the Frying Pan of Death
- Darksaber
- Posts: 10931
- Joined: Mon Jan 10, 2000 12:01 am
- Contact:
I'll have to take another look at the toscan, as for the shuttle, no the shuttle shouldn't have turrets, the first set of lasers are attached to the wings, which are set to rotate, and have turboempirelasers the next set of laser are set to small guns and have Empirelasers.
Why do you ask, are they firing in all directions?
Why do you ask, are they firing in all directions?
“You can please some of the people all of the time, you can please all of the people some of the time, but you can’t please all of the people all of the time”.”
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- Rookie_One1
- Posts: 1656
- Joined: Thu Feb 26, 2004 12:01 am
No, but they still act as turrets (with only a front facing arcs) when flying itDarksaber wrote:I'll have to take another look at the toscan, as for the shuttle, no the shuttle shouldn't have turrets, the first set of lasers are attached to the wings, which are set to rotate, and have turboempirelasers the next set of laser are set to small guns and have Empirelasers.
Why do you ask, are they firing in all directions?
Could send you the opt later if you want to check the hardpoints (did'nt take time to check it out)
But for the Toscan, it's fine AFAIK (only issue I have is red lasers....but it's more of a personal taste than anything, I preferred the green lasers on that one )
Rookie One, is that you?? - Ru Merleen, Rebel Spy at Imdaar Alpha
Current Holder of the Frying Pan of Death
Current Holder of the Frying Pan of Death
- Rookie_One1
- Posts: 1656
- Joined: Thu Feb 26, 2004 12:01 am
Stupid question I forgot to ask,
Is the DTM planet.dat a replacement or is it new background planets completly ?
Is the DTM planet.dat a replacement or is it new background planets completly ?
Rookie One, is that you?? - Ru Merleen, Rebel Spy at Imdaar Alpha
Current Holder of the Frying Pan of Death
Current Holder of the Frying Pan of Death
- Darksaber
- Posts: 10931
- Joined: Mon Jan 10, 2000 12:01 am
- Contact:
Yes it's a replacement with new planet backgrounds
“You can please some of the people all of the time, you can please all of the people some of the time, but you can’t please all of the people all of the time”.”
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- Adam Mieter
- Posts: 4
- Joined: Sun Dec 12, 2010 10:52 am
Hi again!
Rookie, thanks for the answer!
Also, I don't think it has anything to do with XWAUpgrade, but was anything changed in the in-game texts? I noticed some pretty obvious typos in the tech library and even the ranking system says "Civillian", with two L's. Plus, the Container Class J (if I remember correctly), comes up in the tech library as an R2 astromech droid. Was that intended?
Rookie, thanks for the answer!
Also, I don't think it has anything to do with XWAUpgrade, but was anything changed in the in-game texts? I noticed some pretty obvious typos in the tech library and even the ranking system says "Civillian", with two L's. Plus, the Container Class J (if I remember correctly), comes up in the tech library as an R2 astromech droid. Was that intended?
Proud officer of the Rebel Squadrons.
- Darksaber
- Posts: 10931
- Joined: Mon Jan 10, 2000 12:01 am
- Contact:
Would you care to elaborate on the Typos please so they can be fixed
“You can please some of the people all of the time, you can please all of the people some of the time, but you can’t please all of the people all of the time”.”
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
- John Lydgate
Good Things Come To Those Who Wait....
Darksaber's X-Wing Station
-
- Posts: 46
- Joined: Mon Apr 01, 2013 2:40 am
I noticed a few as well. It's hard to remember what they all were as I already went through with mxvted to fix them, but one that sticks in my head is that every time a description (usually for bombers) said "ordinance" it should have said "ordnance". Also I changed things like manoeuvr to maneuver but IIRC that's a Brit-US difference rather than an actual mispelling.
-
- Posts: 1
- Joined: Sat May 04, 2013 7:12 am
Hi, long time fan of all your work reporting in.
My installer does not seem to run. I get an error message : "Error! Can't initialize plug-ins directory. Please try again later."
Is there a piece of software I need to run the installer, or is there something missing or what? I have no clue what it's asking me.
I am running Windows 7 if that's any consolation.
My installer does not seem to run. I get an error message : "Error! Can't initialize plug-ins directory. Please try again later."
Is there a piece of software I need to run the installer, or is there something missing or what? I have no clue what it's asking me.
I am running Windows 7 if that's any consolation.
-
- Posts: 2263
- Joined: Sat Nov 29, 2003 12:01 am
- Contact:
Snow Gibbon... what the hell are you doing here?