I have XWA with latest 5.6.2 patch (steam Version)
I am encountering attached screenshot error while saving edited mission file.
I have used XWA Exepatcher and patched xwinglliance.exe for 96 to 192 crafts per region.
Pls help urgently.
Yogeme Error [SOLVED]
Yogeme Error [SOLVED]
-
smm2303
- Posts: 48
- Joined: Sat Sep 23, 2017 6:46 am
You do not have the required permissions to view the files attached to this post.
Last edited by Ace Antilles on Sat Nov 11, 2023 9:15 pm, edited 1 time in total.
Reason: Solved
Reason: Solved
-
JaggedFel
- Posts: 425
- Joined: Wed Sep 06, 2006 11:01 pm
- Contact:
This is an external validation tool to make sure there's nothing blatantly wrong with the mission before you try to run it, that it says "may not" means it didn't find anything critical. If it finds a definite problem, it'll say "NOT valid". It does not interfere with YOGEME or the mission itself, it runs after it's been saved and is informational only. You can disable the test in the Options dialog, and it can be run at any time from the Tools menu or the toolbar.
The first * warning is the standard craft limit, I don't take into account the use of patches/hook to extend that.
It looks like your primary issue is the ArrDep trigger errors. The trigger error message fires when when you either have "OR Always(true)" which will always fire regardless of what the other trigger setting is, or you have "AND None(false)", which will never fire. If each one is simply "Always OR Always", then it's fine and you can ignore it. Otherwise you should double-check and ensure that the trigger is saying what you want it to.
I imagine much of the error list will be due to the sheer number of backdrops you have, but most of them can be ignored since they don't do anything once loaded.
The first * warning is the standard craft limit, I don't take into account the use of patches/hook to extend that.
It looks like your primary issue is the ArrDep trigger errors. The trigger error message fires when when you either have "OR Always(true)" which will always fire regardless of what the other trigger setting is, or you have "AND None(false)", which will never fire. If each one is simply "Always OR Always", then it's fine and you can ignore it. Otherwise you should double-check and ensure that the trigger is saying what you want it to.
I imagine much of the error list will be due to the sheer number of backdrops you have, but most of them can be ignored since they don't do anything once loaded.
Ye Olde Galactic Empire Mission Editor v1.15.4
Current software WIPs: TIE Layout and Cutscene Editor, TIE/XvT Cockpit Editor
Libraries / Format specs: *.tie, *.plt, *.tfr, *.lfd , *.act, *.dat image files, *.fnt
Current software WIPs: TIE Layout and Cutscene Editor, TIE/XvT Cockpit Editor
Libraries / Format specs: *.tie, *.plt, *.tfr, *.lfd , *.act, *.dat image files, *.fnt
-
smm2303
- Posts: 48
- Joined: Sat Sep 23, 2017 6:46 am
Thanks a Lot
Yes I disabled warning option before your valued answer. And it works. Thank u very much for your valued support.
Yes I disabled warning option before your valued answer. And it works. Thank u very much for your valued support.
